Henry Palach (Original publish date unknown) To get the rear tire off with 120/90-18 and a saddle bag rack on it , you have to…
David Owen – dowen@westmx.westmont.edu (Original publish date unknown) Does anybody out there have any experience with doing a double brake conversion on a /7? Question:…
Craig Vechorik – vech@benchmarkworks.com (Original publish date unknown) Everbest petcocks (used up to the /5) ARE rebuildable, I do it all the time. Buy a…
J.R. Buchanan – jbuchana@buchanan1.net (Original publish date unknown) OK people, we’re here to talk about rebuilding Bing Constant-depression carburetors. While this article does not cover slide-type…
J.R. Buchanan – jbuchana@buchanan1.net (original publish date unknown) While diagnosing a new noise on my /5 I recently pulled out the throw-out bearing and replaced it…
Tom Childers – tom.childers@gmail.com (6/13/2005) I was never able to get satisfactory brake feel with the stock cable-operated master cylinder on either my R90/6 or…
Robert Fleischer (Snowbum) – snowbum@jps.net Version 1.0 11-2-2001 Description of the system: Beginning with the 1980 U.S.A. models, BMW incorporated a system that inserts clean air…
Ian Johnston – reaper@speakeasy.org August 6, 2001 Recently I had occasion to replace the seatlock in my R100, which was old, and rotated in its housing,…
Duane Ausherman – w6rec@mail.softcom.net (11/28/98) Wheel Bearing Basics BMW has the best wheel bearing system of any motorcycle. To properly support a sidecar rig the wheel…